DataCard SP55 User Manual

47
SP Series Install e-Guide
— No jobs are pending in the spooler for that printer
— The printer is not paused
— The printer is not set to “work offline”
— The printer status is not “User Intervention Required”
— The Printer Toolbox is not in Advanced Setup mode
5 After a card is sent by the printer pool to a specific printer, it cannot be removed from that printer and assigned
to another printer.
6 When a printer issues a message, the message appears on the PC with the name of the printer in the title bar
of the message box. The printer will be unavailable to print cards until the situation causing the message is
corrected. Other printers in the pool will continue to receive card jobs and print cards.

DataCard SP55 Specifications

General

Print Technology	Dye Sublimation
Print Resolution	300 dpi
Print Capabilities	Full-color, monochrome
Card Capacity	100 cards (input hopper), 30 cards (output hopper)
Card Sizes	CR80 (85.6 mm x 54 mm / 3.375" x 2.125")
Connectivity	USB
Power Requirements	100-240 VAC, 50/60 Hz
Operating System Support	Windows 7, 8, 10