Datakom D-500 MK2 User Manual

D-500 MK2 User Manual Firmware V-6.3
- 159 -
COMMAND
DESCRIPTION
ANSWER
MODE STOP
Puts the controller into STOP mode. Alarms
are also cleared.
MODE AUTO
Puts the controller into AUTO mode. Alarms
are also cleared.
MODE MANUAL
Puts the controller into MANUAL (RUN)
mode. Alarms are also cleared.
MODE TEST
Puts the controller into TEST mode. Alarms
are also cleared.
OUT1 ON
Sets remote controlled output #1 to active
state
OUT1 OFF
Sets remote controlled output #1 to passive
state
OUTxx ON
Sets remote controlled output #xx to active
state (xx denotes any number between 1 and
16).
OUTxx OFF
Sets remote controlled output #xx to passive
state (xx denotes any number between 1 and
16).
OUT xx = OFF
OUT xx = ON
OUT 1 = OFF
OUT 1 = ON
Unit forced to AUTO!
Unit forced to STOP!
Unit forced to TEST!
Unit forced to RUN!

Datakom D-500 MK2 Specifications

General

Brand	Datakom
Model	D-500 MK2
Category	Controller
Language	English