Datakom D-500 MK2 - Time Synchronization and Wi-Fi; SNTP Time Synchronization; Wi-Fi Network Configuration

D-500 MK2 User Manual Firmware V-6.3
- 132 -
SNTP (simple network time protocol) communication allows the controller to querry high precision, atomic
clock based date/time servers through the internet and to adjust its internal real time clock to these
servers.
Thanks to the SNTP communication, the internal RTC will reach an atomic clock precision.
Parameter Definition
Factory Set
Description
SNTP Refresh Period
30 sec
This is the wait period between two SNTP requests of
the unit in order to update its internal real time time
clock from the servers.
SNTP Address 1 Port
123
This is the port number of the first SNTP server.
SNTP Address 2 Port
123
This is the port number of the second SNTP server.
SNTP Address 1
0.tr.pool.ntp.org
This is the IP address of the first SNTP server.
SNTP Address 2
1.tr.pool.ntp.org
This is the IP address of the second SNTP server.
Wi-Fi parameter can be configured only from PC software.
Parameter Definition
Factory Set
Description
SSID
………...….
This is the name of wireless network that you want to
connect.
Wi-Fi Password
………...….
This is the password of wireless network that you want
to connect.
17.16. Wi-Fi PARAMETERS
17.15. SNTP PARAMETERS