D-500 MK2 User Manual Firmware V-6.3
- 95 -
The program mode is driven with a two level menu system. The top menu consists on program groups
and each group consists on various program parameters.
When program mode is entered, a list of available groups will be displayed. Navigation between different
groups are made with ▼and ▲buttons. Selected group is shown in reverse video (blue on white). In
order to enter inside a group, please press MENU►button. In order to exit from the group to the main list
please press ◄MENU button.
Navigation inside a group is made also with ▼and ▲buttons. A list of available parameters will
be displayed. Selected parameter is shown in reverse video (blue on white). In order display/change the
value of this parameter, please press MENU► button. Parameter value may be increased and
decreased with ▼and ▲buttons. If these keys are hold pressed, the program value will be
increased/decreased by steps of 10. When a program parameter is modified, it is automatically saved in
memory. If MENU► button is pressed, next parameter will be displayed. If ◄MENU button is pressed,
then the list of parameters in this group will be displayed.
To Next Page
Loading...
