Datakom D-500 MK2 User Manual

D-500 MK2 User Manual Firmware V-6.3
- 7 -
5. TOPOLOGIES
5.1. SELECTING THE TOPOLOGY
5.2. 3 PHASE, 4 WIRE, STAR
5.3. 3 PHASE, 3 WIRE, DELTA
5.4. 3 PHASE, 4 WIRE, DELTA
5.5. 3 PHASE, 3 WIRE, DELTA, 2 CT (L1-L2)
5.6. 3 PHASE, 3 WIRE, DELTA, 2 CT (L1-L3)
5.7. 2 PHASE, 3 WIRE, DELTA, 2 CTs (L1-L2)
5.8. 2 PHASE, 3 WIRE, DELTA, 2 CTs (L1-L3)
5.9. 1 PHASE, 2 WIRE
6. FUNCTIONALITIES
6.1. CT LOCATION SELECTION
6.2. SYNCHRONIZATION FUNCTIONALITY
6.3. MAINS SYNCHRONIZATION FUNCTIONALITY
6.4. SINGLE GENSET PARALLEL WITH MAINS
6.5. AMF FUNCTIONALITY
6.6. ATS FUNCTIONALITY
6.7. REMOTE START FUNCTIONALITY
6.8. ENGINE CONTROLLER FUNCTIONALITY
6.9. REMOTE DISPLAY UNIT FUNCTIONALITY
6.10. 400HZ OPERATION
7. CONNECTION DIAGRAMS
7.1. GENSET SYNCHRONIZATION FUNCTIONALITY
7.2. MAINS SYNCHRONIZATION FUNCTIONALITY
7.3. SINGLE GENSET PARALLEL WITH MAINS FUNCTIONALITY
7.4. AMF FUNCTIONALITY
7.5. ATS FUNCTIONALITY
7.6. REMOTE START FUNCTIONALITY
7.7. ENGINE CONTROL FUNCTIONALITY
7.8. REMOTE DISPLAY PANEL FUNCTIONALITY
8. TERMINAL DESCRIPTION
9. TECHNICAL SPECIFICATIONS
10. DESCRIPTION OF CONTROLS
10.1. FRONT PANEL FUNCTIONALITY
10.2. PUSHBUTTON FUNCTIONS
10.3. DISPLAY SCREEN ORGANIZATION
10.4. AUTOMATIC DISPLAY SCROLL
10.5. MEASURED PARAMETERS
10.6. LED LAMPS
11. WAVEFORM DISPLAY & HARMONIC ANALYSIS
12. DISPLAYING EVENT LOGS

Datakom D-500 MK2 Specifications

General

Brand	Datakom
Model	D-500 MK2
Category	Controller
Language	English