Datakom D-500 MK3 User Manual

D-500 MK3 User Manual Firmware V-14.2
- 51 -
When the Remote Start functionality is selected, the unit will wait for a Remote Start signal from external
controller. Upon reception of this signal, it will run the engine, and provide engine and alternator
instrumentation and fault monitoring. The genset contactor/MCB control functionality will be available.
The unit features both MPU and J1939 CANBUS inputs. Thus, both mechanical and electronic engines
are supported.
6.8. REMOTE START FUNCTIONALITY

Datakom D-500 MK3 Specifications

General

Brand	Datakom
Model	D-500 MK3
Category	Controller
Language	English