D-500 MK3 User Manual Firmware V-14.2

- 98 -

The program mode is driven with a two level menu system. The top menu consists on program groups

and each group consists on various program parameters.

When program mode is entered, a list of available groups will be displayed. Navigation between different

groups are made with ▼and ▲buttons. Selected group is shown in reverse video (blue on white). In

order to enter inside a group, please press MENU►button. In order to exit from the group to the main list

please press ◄MENU button.

Navigation inside a group is made also with ▼and ▲buttons. A list of available parameters will

be displayed. Selected parameter is shown in reverse video (blue on white). In order display/change the

value of this parameter, please press MENU► button. Parameter value may be increased and

decreased with ▼and ▲buttons. If these keys are hold pressed, the program value will be

increased/decreased by steps of 10. When a program parameter is modified, it is automatically saved in

memory. If MENU► button is pressed, next parameter will be displayed. If ◄MENU button is pressed,

then the list of parameters in this group will be displayed.

16.3. NAVIGATING BETWEEN MENUS

Next group

If inside the

group then

exit to main

PGM menu

Enter inside

the group

Return to the

main menu

inside the

same group

Edit

parameter

value

inside the

same group

Datakom D-500 MK3 User Manual

Questions and Answers: