Datalogic Gryphon GD4500 - 1 D SYMBOLOGIES

ENTER/EXIT PROGRAMMING MODE READING PARAMETERS
104 GRYPHON™ I GD/GBT/GM4500
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high frequency,
selectable from the list below. (Controls the beeper’s pitch/tone.)
$CBPFR00
Good Read Beep Frequency = Low
Good Read Beep Frequency = Medium
$CBPFR01
$CBPFR02

Good Read Beep Frequency = High