Datalogic Gryphon GD4500 - Codabar Start;Stop Character Set; Codabar Start;Stop Character Match

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
180 GRYPHON™ I GD/GBT/GM4500
Codabar Start/Stop Character Set
This option specifies the format of transmitted Codabar start/stop characters.
Codabar Start/Stop Character Match
When enabled, this option requires that start and stop characters match
$CCBSC00
Codabar Check Character Set = ABCD/TN*E
Codabar Check Character Set = ABCD/ABCD
$CCBSC01
$CCBSC02
Codabar Check Character Set = abcd/tn*e

Codabar Check Character Set = abcd/abcd
$CCBSC03
$CCBSM00

Codabar Start/Stop Character Match
= Don’t Require Match
Codabar Start/Stop Character Match = Require Match
$CCBSM01