PHARMACODE ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
201
Pharmacode Set Length 2
This feature specifies one of the bar code lengths for "Pharmacode Set Length 2" on page
201
. Length 2 is the maximum label length if in Variable Length Mode, or the second
fixed length if in Fixed Length Mode. The length includes the bar code’s check and data
characters.
Length can be set from 2 to 6 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See "
Set Length 2" on page 298 for more detailed programming
instructions.
Select Pharmacode Length 2 Setting
$CP1L2
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in Appendix D, Keypad represent-
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
Length 2 = 6 (six characters)
To Next Page
Loading...
