Other UPC/EAN Options
Product Reference Guide 243
EAN Two Label Combined Transmission
Enables/disables the transmitting of an EAN two label pair as one label.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN TWO LABEL COMBINED TRANSMISSION = DISABLE
EAN TWO LABEL COMBINED TRANSMISSION = ENABLE
Contact Customer Support for details about advanced programming for this
feature.
To Next Page
Loading...
Need help?
General
