Codabar Enable
Product Reference Guide 347
Codabar Require Quiet Zones
When enabled, this feature requires that quiet zones (margins) be present
for Codabar labels. When disabled, quiet zones are optional.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR REQUIRE QUIET ZONES = DISABLE
CODABAR REQUIRE QUIET ZONES = ENABLE
To Next Page
Loading...
Need help?
General
