Other UPC/EAN Options
Product Reference Guide 247
UPC/EAN Character Reconstruction
Enables/Disables character reconstruction on UPC/EAN labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC/EAN CHARACTER RECONSTRUCTION = DISABLE
UPC/EAN CHARACTER RECONSTRUCTION = ENABLE
To Next Page
Loading...
Need help?
General
