DataBar Expanded Enable
Product Reference Guide 281
DataBar Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for
DataBar Expanded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Expanded LENGTH CONTROL = VARIABLE-LENGTH
DataBar Expanded LENGTH CONTROL = FIXED-LENGTH
NOTE
You must now set the features DataBar Expanded Length 1 and
DataBar Expanded Length 2.
To Next Page
Loading...
Need help?
General
