Product Reference Guide 407
Standard 2 of 5
• Check character must be included in label data.
• Label length including check characters and excluding prefix charac-
ters must meet requirements imposed by the main scanner's fixed or
variable label length control for this symbology type.
• Prefix must be an ASCII character ']S0' (other prefixes specify dif-
ferent check character properties which are not supported).
• Example: ']S00123456789'.
Code 128 / EAN128
• Prefix must be either ASCII characters ']C0', ']C1' or ']C2'.
• Label length excluding prefix character must meet requirements
imposed by the main scanner's fixed or variable label length control
for this symbology type.
• If EAN-128 Symbology is Enabled
and prefix is ']C1', label will be
identified as an EAN128 otherwise it is identified as a Code 128.
• A prefix of ']C0' designates that no function code is present in the
1st or 2nd character position.
• A prefix of ']C2' designates that a function code 1 is present in the
2nd character.
• Example : ']C0Code_128.Test'.
To Next Page
Loading...
Need help?
General
