3-12 Magellan
®
8500 Scanner
2. If the top edge of the platter is blocked, you may find it easier to
grasp the platter vertical bezel as shown in Figure 3-3b.
3. The vertical scan window is held in place by two tabs each on its
top and bottom edges. To remove it, carefully push out on the top
as shown in Figure 3-4 and lift it out. Carefully dispose of any
damaged glass.
Figure 3-4. Vertical Scan Window Removal/Replacement
NOTE
Use caution to avoid damage to the now exposed horizontal and vertical
scan windows. If cleaning of these windows is necessary, use a nonabrasive,
mild, water-based glass cleaner and paper towels or lint-free cleaning tis-
sues and take care to avoid scratching these windows (damage to the win-
dows can degrade scanning performance).
Vertical Scan Window
To Next Page
Loading...
