Datalogic PowerScan PD96 Series - Maxicode; Maxicode Enable; Disable; Maxicode Primary Message Transmission

ENTER/EXIT PROGRAMMING MODE 2D SYMBOLOGIES
208 POWERSCAN™ PD/PM96XX
MAXICODE
Maxicode Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
Maxicode Primary Message Transmission
Enables/disables the transmission of only the Primary Message when the Secondary
Message is not readable.
$CMXEN00

Maxicode = Disable
Maxicode = Enable
$CMXEN01
$CMXPT00

Maxicode Primary Message Transmission = Disable
Maxicode Primary Message Transmission = Enable
$CMXPT01