ENTER/EXIT PROGRAMMING MODE DATA FORMAT
84
POWERSCAN™ PD/PM96XX
Global AIM ID
AIM label identifiers (as opposed to custom characters you select yourself as with label
identifiers) can be included with scanned bar code data. See
page 286 for more detailed
programming instructions.
GS1-128 AIM ID
If Global AIM ID is disabled, the AIM ID for GS1-128 can be enabled/disabled inde-
pendently. The AIM ID for GS1-128 is a ]C1, ]C2.
AIM IDs for other symbologies can be enabled/disabled independently as well. Contact
Customer Support for assistance.
NOTE: This feature enables/disables addition of AIM IDs for all symbology
types.
$CAIEN00
Global AIM ID = Disable
Global AIM ID = Enable
$CAIEN01
$CU8AI00
Global AIM ID = Disable
Global AIM ID = Enable
$CU8AI01
To Next Page
Loading...
