Linking to a Host
Quick Reference Guide 9
Bluetooth Pairing
To pair with a Bluetooth enabled Host:
1. Press the scan button to wake up the reader.
2. Press the Link button. The blue LED blinking indi-
cate that the scanner is discoverable by the Host.
Alternatively, you can read one of the profile labels
(see Linking to a Host on page 8) and the reader will
become automatically discoverable by the Host.
3. On the Host, use the dedicated Bluetooth applica-
tion to search for new devices. Select the RIDA
scanner from the list of available devices. If you
receive an error message, it may be necessary to
disable security on the device.
4. When the scanner ends the pairing with the Host
the blue LED remains on. Depending on the Blue-
tooth profile, you can check the connection:
A. For SPP: use an RS-232 terminal program to see
incoming data on the port designated by the
Host Bluetooth application (Bluetooth outgoing
COM port).
B. For HID: use a text editor to see incoming data on
the Host.
Bluetooth Unpairing
To unpair the reader and the Host, press and hold the Link
button until the blue LED turns off.
Alternatively, read the following unlink label.
NOTE
The DBT6400 reader can be set up to require a
PIN code when connecting. If you want to set up
a PIN, or add new equipment to a system that
uses a custom security PIN, please refer to the
PRG for details.
NOTE
Before pairing to another Host, the reader must
be unpaired from the previous.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
