Ergonomic Recommendations
46 RIDA™ DBT6400
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy
reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Cleaning
Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure
best performance during scanning operations. Contacts
on the scanner and the base should also be cleaned as
needed to ensure a good connection.
Be sure to unplug the reader and base before cleaning.
Use a soft, dry cloth to clean the product. If the product is
very soiled, clean it with a soft cloth moistened with a
diluted non-aggressive cleaning solution or diluted ethyl
alcohol.
CAUTION
In order to avoid or minimize the potential risk
of ergonomic injury follow the recommenda-
tions below. Consult with your local Health &
Safety Manager to ensure that you are adhering
to your company’s safety programs to prevent
employee injury.
CAUTION
Do not use abrasive or aggressive cleansing
agents or abrasive pads to clean scan windows,
contacts or plastics.
Do not spray or pour liquids directly onto the
unit.