Datalogic Touch TD1100 Family - Codablock F AIM Check; Codablock F Length Control

Codablock F Enter/Exit Programming Mode
Product Reference Guide 229
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding for the Codablock
F symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
$CCFAC00
Codablock F AIM Check = Not AIM compliant
$CCFAC01

Codablock F AIM Check = AIM compliant
DEFAULT
$CCFLC00
Codablock F Length Control = Variable Length
$CCFLC01

Codablock F = Fixed Length
DEFAULT