Datalogic Touch TD1100 Family - Code 5 Check Character Transmission; Code 5 Hex to Decimal Conversion

Enter/Exit Programming Mode Code 5
234 Touch TD1100
Code 5 Check Character Transmission
This feature enables/disables transmission of an optional Code 5 check character.
Code 5 Hex to Decimal Conversion
This feature enables/disables the conversion of hexadecimal label data to decimal label data.
$CC5CT00
Code 5 Check Character Transmission = Don’t Send
$CC5CT01

Code 5 Check Character Transmission = Send
DEFAULT
$CC5HD00
Code 5 Hex to Decimal Conversion = Disable
$CC5HD01

Code 5 Hex to Decimal Conversion = Enable
DEFAULT