Datamax M-Class Mark II Series User Manual

ii
5 Maintenance and Adjustments
5.1
Cleaning Intervals ...........................................................47
5.2 Cleaning the Printhead.....................................................48
5.3 Media Width Adjustment ..................................................49
5.4 Printhead Burn Line Adjustment ........................................50
5.5 Printhead Pressure Adjustment .........................................51
5.6 Printhead Replacement ....................................................52
5.7 Darkness Adjustment.......................................................53
5.8 Resetting the Printer........................................................54
5.9 Downloading Firmware and Fonts ......................................55
5.10
File Handling Messages (Display-Equipped Models) ..............56
6 Troubleshooting
6.1
Problem Resolution..........................................................59
6.2 Fault and Warning Messages (Display-Equipped Models).......63
6.3 Hex Dump Mode .............................................................68
Appendix A - Specifications
Appendix B - GPIO Port
Appendix C - Paper Menu Setup
(Non-Display Models)
Appendix D - Changing the Language

Datamax M-Class Mark II Series Specifications

General

Memory	16 MB DRAM, 8 MB Flash
Operating Temperature	40°F to 95°F (4°C to 35°C)
Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi, 300 dpi
Print Speed	152 mm per second
Interfaces	USB, Serial
Optional Interfaces	Wireless 802.11b/g
Media Sensor	Reflective and Transmissive
Media Type	Labels, Tags, Tickets
Media Width	19 to 118 mm
Media Thickness	0.0025 to 0.0100 inches (0.0635 to 0.254 mm)
Ribbon Width	1.0" (25.4 mm) to 4.09 inches (27 to 104 mm)
Ribbon Length	1968' (600 m)
Storage Temperature	-4°F to 122°F (-20°C to 50°C)
Max Print Length	99 inches (2514 mm)