15
For Wireless LAN Connections:
Close the ‘Open a configuration file…’ dialogue box.
a) In the toolbar, Click on the ‘ TCP/IP Configuration’
Icon
.
b) In the ‘TCP/IP Configuration’ dialogue box enter the
IP address of the printer and click ‘OK’. (The IP
address should be displayed on the printers LCD).
c) In the toolbar, from the drop down menu box, select
“TCP_IP”. Then click on the Query Printer Icon
.
3) At this point you may browse the Printer Component
categories and make any changes necessary to the
printer configuration.
4) Once your changes are complete, send the new settings
to the printer using the ‘Send’ button.
Note: When sending the changes to the printer, only the
changes displayed on the current page will be
sent. You must click the ‘Send’ button for each
page that has been modified.
To Next Page
Loading...
Need help?
General