Datamax RL4 User Manual

34
Light print on the right side of the label:
 The printer’s cover is not latched down: Latch it.
 The printhead is not properly aligned: Call for service.
Printer fails to power ON:
 The battery may need to be charged: Charge the battery (see Section 2.1).
Label advances 8 inches before a fault indication:
 The media may not be properly loaded: Reload it (see Section 2.3). When loading media ensure
that the supply hubs are against the media and that gaps or marks in the labels are in line with
the media sensor.
 The media sensor or media sensor circuitry may be defective: Call for service.
Labels move excessively from side to side during printing:
 The media may not be properly loaded: Reload it (see Section 2.3). When loading media ensure
that the supply hubs are against the media and that gaps or marks in the labels are in line with
the media sensor.

Datamax RL4 Specifications

General

Brand	Datamax
Model	RL4
Category	Printer
Language	English