C-4
Step B: Windows Port Driver Installation:
1) Turn on the printer and wait until the “Ready”
screen appears. The PC will then detect the
printer and launch the “Found New Hardware
Wizard”.
2) Select the “No, not this time” radio button and
then click Next.
3) Select the “Install from a list or specific
(Advanced)” radio button and then click Next.
4) Select the “Search for the best driver in these
locations” radio button.
5) Check the “Include this location in the search”
checkbox and then click Browse.
6) Navigate to the “Driver” folder you created
earlier that contains the “Datamax-O'Neil
Composite Class.inf” file.
7) Select the folder and then Click ‘OK’. Then Click
Next.
To Next Page
Loading...
