Datamax Workstation w1110 - Reporting Features

4 | Operation
Workstation Series User’s Guide 54
The print job can be canceled by pushing the Feed/Cancel (right) button with a long
press. The green LED will illuminate with a solid light indicating the printer ready state.
Reporting
The printer has a reporting feature that allows the user to print two different reports:
• System Report
• Settings Report
System Report
The system report contains information about the printer including the following:
System Report
• Printer Model
• Firmware Version
• FPGA Version
•Boot Version
•RAM Size
• Flash Size
• Printer Key
• Absolute Counter
• Setup File
• Paper
• Ethernet IP
• Ethernet MAC
• Ethernet DHCP
• Hostname
• Serial Port Settings
• Head Temperature
• Motor Temperature
• Head Voltage
• Session Label Count
• Printer Mode
To print the System Report, push the Reset button and the Feed/Cancel (right) button
simultaneously with a short press.