Datasat AP25 - Page 165

AP25 Installation and Operating Guide Version 1.00
Appendix H. Serial Command AP! H-9 Document #: 9301H79500 Ver. 1.00
11. Master Fader Mute
Command: @MUTED<space>[New Value]<CR>
Operation
Response: MUTED<space>[Value]<CR>
Read/Write
Mute or Unmute the AP25 output.
Parameters
[New Value] 1 to mute, 0 to unmute.
[Value] Current mute value.
Example
Mute
Send: MUTED 1
Receive: MUTED 1
12. Monitor Level
Command: @MONITORLEVEL<space>[New Value]<CR>
Operation
Response: MONITORLEVEL<space>[Value]<CR>
Read/Write
Set or read the AP25 monitor level.
Parameters
[New Value] 0 (minimum) to 100 (maximum).
[Value] Current monitor level value.
Example
MONITORLEVEL
Send: MONITORLEVEL 70
Receive: MONITORLEVEL 70