Datasat AP25 - Page 166

AP25 Installation and Operating Guide Version 1.00
Appendix H. Serial Command AP! H-10 Document #: 9301H79500 Ver. 1.00
13. Monitor Mute
Command: @MONITORMUTE<space>[New Value]<CR>
Operation
Response: MONITORMUTE<space>[Value]<CR>
Read/Write
Set or read the AP25 monitor level.
Parameters
[New Value] 0 (unmute) or 1 (mute).
[Value] Current mutevalue.
Example
Mute the monitor.
Send: MONITORMUTE 1
Receive: MONITORMUTE 1