Datavideo NVS-40D - Appendix 1 Led Indicator Status and Behaviors

97
Appendix 1 LED indicator Status and Behaviors
Please refer to following table for the LED indictor status and behaviors of the NVS-
40 and its SSD/HDD enclosure.
NVS-40
Function
RED
Blinking RED
GREEN
Power LED
System Boot-
up/Program
Initialization
Error
System Ready
SDI
N/A
Error
Source Input OK
HDMI
N/A
Error
Source Input OK
REC
N/A
Error
1. The hard disk is
not inserted into
the HD slot or the
hard disk is
inserted without
locking.
2. All of the
Recording settings
of the Web UI are
set in “Disable
“Disable”.
3. There is no
input signal.
4. If the Advanced
Mode is activated.
Recording
STREAM
N/A
Error
1. The Ethernet
cable is not
connected.
2. All of the
Streaming settings
of the Web UI are
set in “Disable”.
3. There is no
input signal.
Streaming On