EasyManua.ls Logo

Datron PRC1099A - Technical Specifications

Datron PRC1099A
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1: Introduction
1-2 PRC1099A-MSOP
RAT7000B antenna tuner in mobile installations and other applications
where the antenna must be located away from the transceiver.
PRC-PS AC power supply in place of the internal battery.
High power amplifiers RA100 (100W) and RA400-99 (400W) to provide
automatic control of these amplifiers.
PRC1099A-ECU extended control unit.
Loudspeaker electromagnetic LS-R to monitor radio reception.
Morse key KYR for telegraphy.
Secure voice equipment designed for HF SSB operation.
PRC1099A for digital data (burst or RTTY) transmission and reception.
Technical Specifications
Note: Specifications are subject to change without notice or obligation.
Characteristic Specification
General
Frequency Range 1.6 to 30 MHz
Available Channels 2,840,000 in 10 Hz steps
Preset Channels 100 programmable memory channels
Scanning Radio and ALE scan modes
Channel Programming From front panel or remotely via computer
Modes USB, LSB, CW, AME; simplex or
half-duplex
Input Power 11 to 15 Vdc
Battery Pack BB-LA6 sealed lead calcium
Low Battery Indicator LCD battery icon
Antenna Port BNC for 50 ohm broadband antennas or for
connection to external amplifier; whip
antenna port
Display Multifunction custom LED with backlight
Mechanical/Environmental
Size 11.1“ x 4.1” x 9.25”
(28.2 cm x 10.5 cm x 23.5 cm);
W x H x D, including battery pack
Weight 9.7 lb. (4,4 kg) without battery pack;
BB-LA6 pack 2 lb. (0.9 kg)

Table of Contents

Other manuals for Datron PRC1099A

Related product manuals