Datron PRC1099A - TransAdapt;Transcall Settings Configuration; Accessing the TA Menu; TA Menu Structure and Legend

4: Radio Programming
4-26 PRC1099A-MSOP
Accessing
the Menu
To program the radio’s TransAdapt/Transcall settings:
1. Toggle the DIGIT knob until the TA icon flashes.
2. Toggle the TUNE knob to access the TransAdapt/Transcall menu. The first
selection in the menu is RX ADD.
3. Toggle and hold the TUNE knob to scroll through the other menu selec-
tions. When the selection you want is displayed, press WHIP TUNE to
access it.
4. Follow the Menu Structure and Menu Selections below to assist in
programming the radio.
Menu
Structure
The diagram below shows the structure of the TransAdapt/Transcall menu and
the legend indicates how to work within the selections and their settings.
RX ADD
OPT
SCAN
CALL
DATA
MSG
ALE
XXX = 000 to 255
Change with Tune knob
Save with Whip Tune butto
n
TA
RX ADD
TA : SCXXX
TABER : XX
CS : XXXX
BER NUM
CALL SEL
XX = 00 to 70
Change with Tune knob
Save with Whip Tune button
X = TACL or TCCL
Change with Tune knob
Save with Whip Tune button
- Legend -
Indicates Whip tune button pressed
Indicates Tune knob moved up
Indicates Tune knob moved down
To exit an
y
menu, use Di
g
it knob