Genesis II Select
™
User’s & Installation Manual
16/September/2015
29
SQUELCH (SQL): Selects the type of Doppler audio you hear. In
squelch mode, the sound is only the Doppler tone for the currently
displayed target. In the unsquelched mode, the unit sends out all
Doppler tones received by the antenna—patrol motor vehicles,
targets, interference, and noise. You typically use unsquelched audio
when you listen for interference.
RANGE (– RANGE +): Regulates the maximum target-acquisition
distance. You press the negative (–) or positive (+) side of the RANGE
button to decrease and increase the target acquisition distance.
When in the Stopwatch Mode, the RANGE button cycles through
distance units.
VOLUME (– VOLUME +): The volume control regulates the Doppler
audio and system status tone (beep) volume. Press the negative (–) or
positive (+) side of the VOLUME button to decrease and increase the
volume level.
FAST (FAST): Controls the Faster Mode feature.
MODE (MODE): Switches between the three operating modes:
Stationary Mode, Moving Mode Opposite Direction, and Moving
Mode Same Direction.
LOCK (LOCK): Transfers the target speed in the TARGET window to
the LOCKED window. After locking the speed, the system continues
to process and display target speeds in the TARGET window, so you
can continue to track the history of the target speed.
ANTENNA (ANT) FRONT and REAR: Activates and deactivates the
front and rear antenna. An antenna must be activated to track a
target speed.
t 0OMZPOFBOUFOOBNBZCFBDUJWBUFEBUBOZHJWFOUJNF
To Next Page
Loading...
