Deif AGC 150 - Page 13

Guided
Active control buttons and LED's are visible, inactive are not shown.
Example: AGC 150 is in SEMI-AUTO mode. The generator is stopped.
The only possible action is to start the generator, and so only the Start
button is visible.
Guided with genset
Active control buttons, LED's and motor/generator symbols are visible,
inactive are not shown.
Example: AGC 150 is in SEMI-AUTO mode. The generator is stopped.
The only possible action is to start the generator, and so only the Start
button and the red motor/generator symbols are visible.
All Mimic settings
The breaker symbol flashes green:
• Controller is synchronising
• Controller is de-loading
The breaker symbol turns red:
• Breaker position failure
• Breaker close failure
OPERATOR's MANUAL 4189341186E EN Page 13 of 38