Deif AGC 150 - 1. Introduction

1. Introduction
1.1 About the operator's manual
General purpose
The general purpose of this document is to give the operator important information to be used in the daily operation of the controller.
DANGER!
Read this document before working with the AGC 150 controller. Failure to do this may result in human injury or damage to
the equipment.
Intended users of the Operator's manual
The Operator's manual is primarily intended for the operator that performs daily operations with the controller.
The manual includes an overview of the LEDs, push-buttons and screens on the controller, as well as general operator tasks,
alarms, and logs.
List of technical documentation for AGC 150
Document Contents
Product sheet
• Short description
• Controller applications
• Main features and functions
• Technical data
• Protections
• Dimensions
Data sheet
• General description
• Functions and features
• Controller applications
• Controller types and variants
• Protections
• Inputs and outputs
• Technical specifications
Designer's handbook
• Principles
• General controller sequences, functions and protections
• GENSET controller
• Mains controller
• BTB controller
• Hybrid controller
• Protections and alarms
• AC configuration and nominal settings
• Breaker and synchronisation
• Regulation
• Load sharing
• Hardware characteristics
• Modbus
Installation instructions
• Tools and materials
OPERATOR's MANUAL 4189341186E EN Page 3 of 38