Deif AGC 150 - Hybrid Shortcut Menu

BLOCKED FOR START
PID references
PID1 Manuel Up
PID1 Manuel Down
PID references: The input must be active to be shown in the list.
• The scaling is adjusted to the input selected.
• The values are the same found one the PID input tabs (reference 1-3).
Manual regulation (up and down): Used for PID1.
• Not active during ramp up/down.
4.12 Hybrid shortcut menu
The AGC 150 has a shortcut menu for start/stop of the PV inverter in SEMI-AUTO mode. To activate the Hybrid shortcut menu,
press the Shortcut
button.
DG BLOCKED FOR START
Select PV semi start/PV semi stop with the Up and Down buttons, and select the menu with the OK button.
DG BLOCKED FOR START
OPERATOR's MANUAL 4189341186E EN Page 34 of 38