4. Menu structure
4.1 Menu structure
The AGC 150 has two menu systems, which can be used without password entry:
• The View menu system: The commonly used menu system, with 20 configurable windows that can be entered with the arrow
buttons.
• The Settings menu system: The menu system for setting up the controller, and to see detailed information that is not available
in the view menu system.
Changes to the parameter settings are password protected.
4.2 The View menu
When AGC 150 is powered up, the View menu appears. It is the daily use menu for the operator, which shows various measured
values. If an alarm is present, the event and alarm list is shown at power-up.
Figure 4.1
The View menu
1. Status line.
2. Operational status or measurements.
3. View Page number, Power Management priority (if available) or Engine DEF level (if available).
The View menu contains up to 20 different pages. Navigate through the pages with the Up and Down buttons.
Figure 4.2
Example: Navigating the View menu
G
G
PM-Prio:01 1/20
DG BLOCKED FOR START
U-Supply
Energy Total
Run absolute
0kvar
0kWh
0hrs
0kW
25.9V
0.00PF
0kVa
BB L1
G
PM-Prio:01 2/20
DG BLOCKED FOR START
Energy Total
Run absolute
0kvar
0kWh
0hrs
0kW
0.00Hz 0kW
G L1 0.00Hz
0.00PF
Press
OPERATOR's MANUAL 4189341186E EN Page 15 of 38
To Next Page
Loading...
