Deif AGC 150 - 4.8 The Service View

4.8 The Service View
The Service View is used to view the status of the controller. The controller settings can not be changed through the Service View,
except for changing the Passwords.
Navigate through the different status views with the Up
, Down and OK buttons.
Figure 4.4
Example: Navigating the Service View
G
G
PM-Prio:01 1/20
DG BLOCKED FOR START
U-Supply
Energy Total
Run absolute
0kvar
0kWh
0hrs
0kW
25.9V
0.00PF
0kVa
Press
DG BLOCKED FOR START
Service View
DG BLOCKED FOR START
I/O status
DG BLOCKED FOR START
Service view
Press
Press
Press
1
0
0
0
0
!
Logs
Settings
Alarm list
4.9 Menu numbers
In AGC 150 each setting or parameter has a unique menu number. On the display screen, the menu number can be seen in the
upper right corner:
DG BLOCKED FOR START
Generator nominal U
Voltage: 400V
6004
Menu numbers can also be found in the Utility Software:
1. From the toolbar, select the Parameters
button.
2. In View mode, choose the List view.
3. The menu numbers are shown in the Channel column.
OPERATOR's MANUAL 4189341186E EN Page 32 of 38