Deif AGC 150 - 4.7 The Settings menu

4.7 The Settings menu
The Settings menu is used for setting up the controller, and if the operator needs detailed information that is not available in the view
menu system. Navigate through the different setup parameters with the Up , Down and OK buttons.
Figure 4.3 Example: Navigating the Settings menu
G
G
PM-Prio:01 1/20
DG BLOCKED FOR START
U-Supply
Energy Total
Run absolute
0kvar
0kWh
0hrs
0kW
25.9V
0.00PF
0kVa
Press
DG BLOCKED FOR START
Basic settings
DG BLOCKED FOR START
Nominal settings
DG BLOCKED FOR START
Voltage
DG BLOCKED FOR START
Generator nom inal U
6004
Press
Press
Press
Press
Press
!
Logs
Service View
Alarm list
OPERATOR's MANUAL 4189341186E EN Page 31 of 38