Delem DAC-360 - Page 48

V0208, 2.22
Parameter 56
Brake point low speed <
Range : 0 - 9999
Unit : counts
Default : 10
Remark
Only if ‘Control type’ (19) is set to 1 or 2.
Function
Switch point from low speed to zero in the downcounting direction.
Parameter 57
Brake point low speed >
Range : 0 - 9999
Unit : counts
Default : 10
Remark
Only if ‘Control type’ (19) is set to 1 or 2.
Function
Switch point from low speed to zero in the upcounting direction.
Parameter 58
Brake point high speed <
Range : 0 - 9999
Unit : counts
Default : 100
Remark
Only if ‘Control type’ (19) is set to 2.
Function
Switch point from high speed to low speed in the downcounting direction.
Parameter 59
Brake point high speed >
Range : 0 - 9999
Unit : counts
Default : 100
Remark
Only if ‘Control type’ (19) is set to 2.
Function