page 45
05_Programmazione_en.fm
Machine programming
Bisky
•TRAY EDGE:
Il valore impostato in questo parametro determina lo spazio in mm tra il bordo della
teglia e il primo biscotto.
• ROW SPACE:
Il valore impostato in questo parametro determina lo spazio in mm tra un biscotto e
l’altro.
• PAUSE BEFORE SUCTION:
The machine pauses before the suction phase starts. This pause duration can be set.
• DOSING THE FIRST EXTRUSION
This value -expressed in ±%- can be set. It is used to modify the dosing of the first
extrusion of each tray.
• SUCTION PHASE AT THE END OF A TRAY
This value -expressed in %- can be set. It is used to increase the duration of the suction
phase after the last extrusion of each tray.
• CYCLE ACCELERATION
ON/OFF, enables/disables the cycle acceleration function.
To Next Page
Loading...