page 59
05_Programmazione_en.fm
Machine programming
Bisky
Special functions : Off-centre nozzles zig-zag shaped biscuit
•N° OF ROWS
The value you digit must be equal to the number of rows of biscuits that can fit onto
one tray.
• RETARD MOVEMENTS:
The value you digit will determine the quantity of dough that will be deposited
before the nozzle start to rotate.
•EXTRUSION TIME:
The value you digit will determine how much dough will be extruded (biscuit size).
• DEPOSITING SPEED:
The value you digit (from 1 to 100) will determine the speed at which the dough will
be extruded (speed of rollers).
• NUMBER OF ZIG-ZAGS:
The value you digit will determine how many zig-zags the biscuit will be composed
of.
• NOZZLE ROTATION ANGLE:
The value you digit will determine for how many degrees the nozzle will rotate from
0° to 360°.
• NOZZLE ROTATING SPEED:
Il valore impostato in questo parametro determina, con un valore da 1 a 100 la
velocità di rotazione dei beccucci.
• ZIG-ZAG SPACING:
The value you digit will determine the space (in mm.) between one zig-zag.
• TRAY ADVANCING SPEED:
The value you digit will determine the speed at which the tray will advance in order
to create a space between one zig-zag and another.
• SUCTION TIME:
The value you digit will determine the suction time (quantity of dough) that will be
sucked back up the nozzle after each deposit.
• SUCTION ON/OFF:
When the suction is OFF, the suction will start when the tray drops down after each
deposit (DOUGH DETACHMENT). If the suction is ON the tray conveyor table will drop
(DOUGH DETACHMENT) only after the suction has been completed.
• REPEAT CYCLE TIME:
The value you digit will determines the pause time of the belts after a tray has been
filled (automatic re-start of belts).
• HORIZONTAL DOUGH DETACHMENT
ON, OFF enables the horizontal dough detachment.
To Next Page
Loading...