Safety instructions
WARNING Whenever you need to lift the system, get others to assist you. To avoid injury, do
not attempt to lift the system by yourself.
WARNING Opening or removing the system cover while the system is powered on may expose
you to a risk of electric shock.
CAUTION Do not operate the system without the cover for a duration exceeding five minutes.
Operating the system without the system cover can result in component damage.
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.Always use a static mat and anti-static wristband while
working on components inside the system.
Note: It is recommended that you always use an anti-static mat and an anti-static wristband
while working on components inside the system.
CAUTION To ensure proper operation and cooling, all bays in the system and system fans must
be always populated with a component or a blank.
Using the ACM Health dashboard to monitor the DP4400
You can access the appliance configuration manager (ACM) Health dashboard to monitor the
health of the DP4400. For each device, the interface displays alerts for the system. Clicking an
alert provides additional details.
Remove and replace assemblies
12 Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures
To Next Page
Loading...
