Figure 11 Installing a hard drive
When the system is powered on, the hard drive automatically begins to rebuild. This process
can take up to 8 hours to complete.
Install the front bezel
The procedure to install the front bezel with the LCD panel and the front bezel without the LCD
panel is the same.
Procedure
1. Align and insert the right end of the bezel onto the system.
2. Press the release button and fit the left end of the bezel onto the system.
3. Lock the bezel by using the key.
Remove and replace assemblies
Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures 25
To Next Page
Loading...
