Dell EMC DP4400 - Remove the NIC Card from Expansion Card Riser 1; Install the NIC Card into Expansion Card Riser 1

Figure 52 Remove System cover
Remove the NIC card from expansion card riser 1
Procedure
1. Pull the expansion card latch from the slot.
2. Remove the card from the expansion card connector.
Figure 53
Removing the NIC card from expansion card riser 1
Install the NIC card into expansion card riser 1
Before you begin
Follow all safety guidelines.
Procedure
1. Unpack the NIC card and prepare it for installation.
Remove and replace assemblies
Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures 67