Table 3 Status LED indicators and descriptions (continued)
Icon Description Condition Corrective action
Memory
indicator
The indicator turns
solid amber if a
memory error occurs.
Check the System Event Log or system
messages for the location of the failed
memory. Reseat the memory module
PCIe indicator The indicator turns
solid amber if a PCIe
card experiences an
error.
Restart the system. Update any
required drivers for the PCIe card.
Reinstall the card.
Hard drive indicator codes
Each hard drive carrier has an activity LED indicator and a status LED indicator. The indicators
provide information about the current status of the hard drive. The activity LED indicator indicates
whether the hard drive is currently in use or not. The status LED indicator indicates the power
condition of the drive.
Figure 5 Hard drive indicators
1. hard drive activity LED indicator
2. hard drive status LED indicator
3. hard drive
The hard drive indicator codes table describes the indicator codes: flashing green, steady green,
and amber.
Table 4
Hard drive indicator codes
Hard drive status indicator code Condition
Flashes green twice per second Identifying drive or preparing for removal.
Off Drive ready for removal.
Remove and replace assemblies
20 Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures
To Next Page
Loading...
