Dell EMC DP4400 - Page 82

sysadmin@ssg242172# storage add tier cache dev31 spindle-group 1
Checking storage requirements...done
Adding dev31 to the cache tier...done
Updating system information...done
dev31 successfully added to the cache tier.
7. To verify that the cache tier was added successfully, type the following command: #
storage show tier cache
sysadmin@ssg242172# storage show tier cache
Cache tier details:
Device Device Device
Group Size
------ ------ ---------
dg4 31 960.0 GiB
------ ------ ---------
Spindle Devices Count Total Size
Group
------- ------- ----- ----------
1 31 1 960.0 GiB
------- ------- ----- ----------
Current cache tier size: 0.9 TiB
Storage addable devices:
Device Device Device
Type Size
--------- ------ -------
(unknown) 14 4.1 TiB
(unknown) 15 4.1 TiB
(unknown) 16 4.1 TiB
(unknown) 17 4.1 TiB
(unknown) 26 4.1 TiB
(unknown) 27 4.1 TiB
(unknown) 28 4.1 TiB
(unknown) 29 4.1 TiB
(unknown) 30 4.1 TiB
--------- ------ -------
Capacity License:
License Total Used Remaining
-------- --------- --------- ---------
CAPACITY 54.56 TiB 54.56 TiB 0.00 TiB
-------- --------- --------- ---------
8. To verify that the filesystem is enabled and running, type the following command: filesys
status
sysadmin@ssg242172# filesys status
The filesystem is enabled and running.
Results
The NVMe replacement is complete.
Remove and replace assemblies
82 Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures