Installing the system cover
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Ensure that all internal cables are routed, connected, and that no tools or extra parts are left inside the system.
Steps
1 Align the tabs on the system cover with the corresponding slots on the system.
2 Press the system cover until it clicks into place.
Figure 10. Installing the system cover
Next steps
1 Place the system upright on a at, stable surface.
2 Reconnect the peripherals and connect the system to the electrical outlet.
3 Power on the system, including any attached peripherals.
Front bezel
Removing the front bezel
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure that is listed in Before working inside your system.
42
Installing and removing system components
To Next Page
Loading...
