Control panel
Removing the control panel cage
Prerequisites
1 Follow the safety guidelines listed in Safety instructions
2 Follow the procedure that is listed in Before working inside your system.
3 Disconnect all peripherals that are connected to the control panel.
4 Disconnect the control panel cable and control panel USB cable from the system board.
CAUTION: Do not use excessive force when removing the control panel cables as it can damage the connectors.
5 Remove the front bezel.
Steps
1 Using the Phillips #1 screwdriver, remove the screws that secure the control panel cage to the system.
2 Slide the control panel cage out of the system along with the cables.
Figure 54. Removing the control panel cage
Next step
1 Remove the control panel.
Removing the control panel
Prerequisites
1 Follow the safety guidelines listed in Safety instructions
2 Follow the procedure that is listed in Before working inside your system.
84
Installing and removing system components
To Next Page
Loading...
