Dell EMC PowerEdge T140 - System Components Specifications

Supported operating systems
The Dell EMC PowerEdge T140 supports the following operating systems:
• Canonical Ubuntu LTS
• Citrix XenServer
• Microsoft Windows Server
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
• VMware ESXi
NOTE: For more information, go to Dell.com/ossupport.
NOTE: For more information about the specic versions and additions, go to https://www.dell.com/support/home/Drivers/
SupportedOS/poweredge-t140.
PSU specications
The Dell EMC PowerEdge T140 system supports up to one AC cabled power supply unit (PSU).
Table 14. Dell EMC PowerEdge T140 PSU specications
PSU Class Heat
dissipation
(maximum)
Frequency Voltage AC DC Current
High line
100–240 V
Low line
100–140 V
365 W AC Gold 1908 BTU/hr
50/60 Hz
100–240 V
AC,
autoranging
365 W N/A N/A 5 A
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 240 V.
Cooling fan specications
The Dell EMC PowerEdge T140 system supports the following:
• One system cooling fan located at the back of the system.
• One processor cooling fan located on the heat sink.
NOTE
: When selecting or upgrading the system conguration, to ensure optimum power utilization, verify the system power
consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.
System battery specications
The Dell EMC PowerEdge T140 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion card specications
The Dell EMC PowerEdge T140 system supports up to four PCI express (PCIe) Generation 3.
94
Technical specications